The ProSTUD® Drywall Framing System with Smart Edge™ Technology can be called many things. Strong. Versatile. Fast. And without a doubt-revolutionary. But one of the biggest benefits to keep in mind is this: ProSTUD® was developed, tested and approved by pros in the field who demanded nothing less than achieving absolute ease of use. Its performance has also been proven by the most extensive laboratory evaluations available. All of which means ProSTUD® comes with complete confidence and no questions about code compliance. With the backing of online, mobile and data-rich BIM resources, there's no better example of a broader vision at work.
Request Information
Unit of Measure
Items
ProSTUD® Drywall Framing Systems

ProSTUD® 0.152 Square Inch (in²) Area Drywall Stud
ProSTUD® Drywall Framing Systems

ProSTUD® 0.182 Square Inch (in²) Area Drywall Stud
ProSTUD® Drywall Framing Systems

ProSTUD® 0.221 Square Inch (in²) Area Drywall Stud
ProSTUD® Drywall Framing Systems

ProSTUD® 0.234 Square Inch (in²) Area Drywall Stud
ProSTUD® Drywall Framing Systems

ProSTUD® 0.303 Square Inch (in²) Area Drywall Stud
Description N/A The ProSTUD® Drywall Framing System with Smart Edge™ Technology can be called many things. Strong. Versatile. Fast. And without a doubt-revolutionary. But one of the biggest benefits to keep in mind is this: ProSTUD® was developed, tested and approved by pros in the field who demanded nothing less than achieving absolute ease of use. Its performance has also been proven by the most extensive laboratory evaluations available. All of which means ProSTUD® comes with complete confidence and no questions about code compliance. With the backing of online, mobile and data-rich BIM resources, there's no better example of a broader vision at work.
Brands N/A A-1 Alloys ClarkDietrich® ProSTUD®
Design Thickness N/A 0.0346 in
Tensile Strength Fy N/A 33 ksi
Area N/A 0.152 in² N/A 0.182 in² N/A 0.221 in² N/A 0.234 in² N/A 0.303 in²
Weight N/A 0.52 lb/ft N/A 0.62 lb/ft N/A 0.75 lb/ft N/A 0.80 lb/ft N/A 1.03 lb/ft
Gross Section Properties (lx) N/A 0.070 in4 N/A 0.186 in4 N/A 0.439 in4 N/A 0.553 in4 N/A 1.463 in4
Gross Section Properties (Rx) N/A 0.679 in N/A 1.010 in N/A 1.409 in N/A 1.538 in N/A 2.196 in
Gross Section Properties (ly) N/A 0.032 in4 N/A 0.037 in4 N/A 0.041 in4 N/A 0.043 in4 N/A 0.047 in4
Gross Section Properties (Ry) N/A 0.456 in N/A 0.449 in N/A 0.433 in N/A 0.426 in N/A 0.394 in
Effective Section Properties at Tensile Strength (Fy) (Ae) N/A 0.114 in² N/A 0.125 in² N/A 0.127 in² N/A 0.128 in² N/A 0.130 in²
Effective Section Properties at Tensile Strength (Fy) (lx) N/A 0.070 in4 N/A 0.186 in4 N/A 0.439 in4 N/A 0.553 in4 N/A 1.428 in4
Effective Section Properties at Tensile Strength (Fy) (Sx) N/A 0.078 in³ N/A 0.138 in³ N/A 0.200 in³ N/A 0.222 in³ N/A 0.399 in³
Effective Section Properties at Tensile Strength (Fy) (Ma) N/A 1541 in·lb N/A 2697 in·lb N/A 3943 in·lb N/A 4394 in·lb N/A 7021 in·lb
Effective Section Properties at Tensile Strength (Fy) (Vag) N/A 632 lb N/A 1007 lb N/A 1024 lb N/A 957 lb N/A 630 lb
Effective Section Properties at Tensile Strength (Fy) (Vanet) N/A 123 lb N/A 431 lb N/A 541 lb N/A 602 lb N/A 630 lb
Torsional Properties (Jx1000) N/A 0.06059 in4 N/A 0.07267 in4 N/A 0.08820 in4 N/A 0.09338 in4 N/A 0.12100 in4
Torsional Properties (Cw) N/A 0.019 in6 N/A 0.046 in6 N/A 0.106 in6 N/A 0.132 in6 N/A 0.332 in6
Torsional Properties (Xo) N/A -1.065 in N/A -0.937 in N/A -0.816 in N/A -0.783 in N/A -0.647 in
Torsional Properties (Ro) N/A 1.344 in N/A 1.449 in N/A 1.685 in N/A 1.777 in N/A 2.323 in
Torsional Properties (ß) N/A 0.371 Beta N/A 0.582 Beta N/A 0.766 Beta N/A 0.806 Beta N/A 0.922 Beta
Length (Lu) N/A 30.8 in N/A 30.1 in N/A 29.6 in N/A 29.5 in N/A 28.6 in
Shear (#6 Screw 0.138 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 151 lb
1-Side (#6 Screw 0.138 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 122 lb
2-Side (#6 Screw 0.138 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 243 lb
Pullout (#6 Screw 0.138 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 61 lb
Shear (#8 Screw 0.164 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 164 lb
1-Side (#8 Screw 0.164 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 122 lb
2-Side (#8 Screw 0.164 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 243 lb
Pullout (#8 Screw 0.164 Inch (in) Diameter and 5/16 Inch (in) Head) N/A 72 lb
Shear (#10 Screw (0.190 Inch (in) Diameter and 0.34 Inch (in) Head) N/A 177 lb
1-Side (#10 Screw (0.190 Inch (in) Diameter and 0.34 Inch (in) Head) N/A 132 lb
2-Side (#10 Screw (0.190 Inch (in) Diameter and 0.34 Inch (in) Head) N/A 265 lb
Pullout (#10 Screw (0.190 Inch (in) Diameter and 0.34 Inch (in) Head) N/A 84 lb
Notes for Allowable Screw Design Values N/A
  • Allowable screw connection capacities are based on Section E4 of the AISI S100-12 Specification.
  • When connecting materials of different steel thicknesses or tensile strengths, use the lowest values. Tabulated values assume two sheets of equal thickness are connected.
  • Screw shear and tension capacities were developed using published screw manufacturer data and evaluation reports available at the time of publication.
  • Screw capacities are based on Allowable Strength Design (ASD) and include a safety factor of 3.0.
  • When multiple fasteners are used, screws are assumed to have a center-to-center spacing of at least three times the nominal diameter (d).
  • Screws are assumed to have a center-of-screw to edge-of-steel dimension of at least 1-1/2 times the nominal diameter (d) of the screw.
  • Tension capacity is based on the lesser of pullout capacity in sheet closest to screw tip, or pullover capacity for sheet closest to screw head (using head diameter).
  • Screw capacities are governed by a conservative estimate of screw capacity, not by sheet steel failure.
  • For higher screw capacities, especially for screw strength, use specific screws from specific manufacturer. See manufacturer’s data for specific allowable values and installation instructions.
Construction Advantages N/A
  • High-strength steel combined with low-profile flange stiffening grooves and double offset web planking increases strength and provides greater limiting heights
  • Diamond-embossed web creates stiffness, reducing flange fade and screw spinout during drywall installation
  • Strong, lightweight stud and track cuts and handles easier than conventional flat steel studs
  • Flange grooves provide sight line for drywall alignment and aid in positioning screws at drywall joints to maintain the 3/8" edge requirement
  • Web and leg enhancements in ProTRAK® provide straight and rigid legs, making it the best choice for framing walls, headers, soffits, and bulkheads
Design Advantages N/A
  • Designed to meet the additional strength requirements of today's building codes: IBC 2015, AISI (S100), ICC-ES AC86 (2015)
  • Smart Edge™ Technology is an enhancement for producing easier-to-handle steel that reduces the risk of cuts and scrapes
  • UL Classified and listed in over 50 designs, including U419, V438, and chase wall assemblies
  • Exceptional sound performance in over 30 tested sound assemblies
  • Can contribute LEED® points in LEED v4 or LEED 2009. EPD and HPD verifications also available.
  • National availability
Addition Information N/A ProSTUD®, in fact, is just one example of how ClarkDietrich® can reinforce your efforts to design and build more intelligently. Yes, we're known as a manufacturer of extensively tested, code-compliant steel framing products, but we offer so much more. Our products perform as a system. We support a range of efforts for smarter installation and design.

We provide the expertise of a versatile engineering services team. And we do it all on a nationwide scale.

We've put together an incredible array of resources to help you be successful on any project, regardless of size or complexity. Within this catalog you'll discover the multiple advantages ProSTUD® has to offer, as well as detailed information on the product lineup, limiting heights, sound and fire assemblies, and more.

Ultimately, your choice of ProSTUD® doesn't come down to the integrity of the product alone, or even its ease of use. You're also looking to the strength of the company that stands behind it. Count on the expertise, services and full support of ClarkDietrich® today-and far into the future.
Note N/A
  • Calculated properties are based on AISI S100-12, North American Specification for Design of Cold-Formed Steel Structural Members and AISI S220-15, North American Standard for Cold-Formed Steel Framing-Nonstructural Members.
  • Effective properties incorporate the strength increase from the cold work of forming as applicable per AISI A7.2.
  • Tabulated gross properties, including torsional properties, are based on full-unreduced cross section of the studs, away from punch outs.
  • Tabulated gross properties, including torsional properties, are based on full-unreduced cross section of the tracks.
  • For deflection calculations, use the effective moment of inertia.
  • Allowable moment includes cold work of forming.
  • Allowable moment is taken as the lowest value based on local or distortional buckling. Distortional buckling strength is based on a k-phi = 0.
  • Web depth for track sections is equal to the nominal height plus two times the design thickness plus the bend radius. Hems on nonstructural track sections are ignored.
  • Available in select markets.